Bambu Lab H3C Leak: What We Know About the 9 Nozzle Tool Changer
A teaser for the Bambu Lab H3C appeared on the Australian Bambu store and was quickly pulled. Here’s what leaked, how the tool changing might work, what it could fix, and the open questions, from an H2C owner.
Bambu Lab S1 3D Scanner: What We Know and What It Needs to Get Right
Bambu Lab’s first 3D scanner, the S1, is due in November 2026. What’s confirmed, what’s only reported, where the price might land, and the two problems it needs to solve.
How to Replace the Extruder Gears on a Bambu Lab X1C, P1P or P1S
If the filament reaches the extruder then keeps retracting, worn or gunked-up gears are a likely cause. Here’s the 20-minute swap on the X1C and P1 series.
How to Fix a Jammed Bambu Lab AMS 2 Pro
When pulling the spool out doesn’t clear it, the jam is deep inside. How to open the AMS 2 Pro, clear the motor block and reassemble it without losing a screw.